1 Star 0 Fork 0

Samdy / ret-sync

加入 Gitee
与超过 1200万 开发者一起发现、参与优秀开源项目,私有仓库也完全免费 :)
免费加入
克隆/下载
贡献代码
同步代码
取消
提示: 由于 Git 不支持空文件夾,创建文件夹后会生成空的 .keep 文件
Loading...
README
GPL-3.0

ret-sync

ret-sync stands for Reverse-Engineering Tools SYNChronization. It is a set of plugins that help to synchronize a debugging session (WinDbg/GDB/LLDB/OllyDbg/OllyDbg2/x64dbg) with a disassembler (IDA/Ghidra/Binary Ninja). The underlying idea is simple: take the best from both worlds (static and dynamic analysis).

Debuggers and dynamic analysis provide us with:

  • local view, with live dynamic context (registers, memory, etc.)
  • built-in specialized features/API (ex: WinDbg's !peb, !drvobj, !address, etc.)

Disassemblers and static analysis provide us with:

  • macro view over modules
  • code analysis, signatures, types, etc.
  • fancy graph view
  • decompilation
  • persistent storage of knowledge within IDBs/GPRs

Key features:

  • synchronize graph and decompilation views with debugger's state
  • no need to deal with ASLR, addresses are rebased on-the-fly
  • pass data (comment, command output) from debugger to disassembler
  • multiple IDBs/GPRs can be synced at the same time allowing to easily trace through multiple modules
  • disassembler and debugger can be on different hosts / VMs

ret-sync is a fork of qb-sync that I developed and maintained during my stay at Quarkslab.


Table of contents


Repository content

The debugger plugins:

  • ext_windbg/sync: WinDbg extension source files, once built: sync.dll
  • ext_gdb/sync.py: GDB plugin
  • ext_lldb/sync.py: LLDB plugin
  • ext_olly1: OllyDbg 1.10 plugin
  • ext_olly2: OllyDbg v2 plugin
  • ext_x64dbg: x64dbg plugin

And the disassembler plugins:

  • ext_ida/SyncPlugin.py
  • ext_ghidra/dist/ghidra_*_retsync.zip: Ghidra plugin
  • ext_bn/retsync: Binary Ninja plugin

General prerequisites

IDA and GDB plugins require a valid Python setup. Python 2 (>=2.7) and Python 3 are supported.

Binary release

Pre-built binaries for WinDbg/OllyDbg/OllyDbg2/x64dbg debuggers are proposed through an Azure DevOps pipeline: Build Status

Select the last build and check the artifacts under the Related section: 6 published.

A pre-built plugin archive of the Ghidra plugin is provided in ext_ghidra/dist.

ret-sync configuration

ret-sync should work out of the box for most users with a typical setup: debugger and disassembler(s) on the same host, module names matching.

Still, in some scenarios a specific configuration may be used. For that, extensions and plugins check for an optional global configuration file named .sync in the user's home directory. It must be a valid .INI file.

Additionally, the IDA and Ghidra plugins also look for the configuration file in the IDB or project directory (<project>.rep) first to allow local, per-IDB/project, settings. If a local configuration file is present, the global configuration file is ignored.

Values declared in these configuration files override default values. Please note, that no .sync file is created by default.

Below we detail, three common scenarios where a configuration file is useful/needed:

  • Remote debugging
  • Modules names mismatch
  • Missing PID

Remote debugging: debugger and disassembler are on different hosts

The [INTERFACE] section is used to customize network related settings. Let's suppose one wants to synchronize IDA with a debugger running inside a virtual machine (or simply another host), common remote kernel debugging scenario.

Simply create two .sync file:

  • one on the machine where IDA is installed, in the IDB directory:
[INTERFACE]
host=192.168.128.1
port=9234

It tells ret-sync IDA plugin to listen on the interface 192.168.128.1 with port 9234. It goes without saying that this interface must be reachable from the remote host or virtual machine.

  • one on the machine where the debugger is executed, in the user's home directory:
[INTERFACE]
host=192.168.128.1
port=9234

It tells ret-sync debugger plugin to connect to the ret-sync IDA plugin configured previously to listen in this interface.

NOTE: You must specify a real IP here, and not use 0.0.0.0. This is because the variable is used by multiple sources both for binding and connecting, so using 0.0.0.0 will result in weird errors.

IDB and debugger modules names are different

[ALIASES]
ntoskrnl_vuln.exe=ntkrnlmp.exe

The [ALIASES] section is used to customize the name which is used by a disassembler (IDA/Ghidra) to register a module to its dispatcher/program manager.

By default, disassembler plugins use the name of the input file. However one may have renamed the file beforehand and it doesn't match anymore the name of the actual process or loaded module as seen by the debugger.

Here we simply tell to the dispatcher to match the name ntkrnlmp.exe (real name) instead of ntoskrnl_vuln.exe (IDB name).

gdb with Qt Creator debugging frontend

The Qt Creator debugging frontend changes the way gdb command output is logged. Since this would interfere with the synchronization an option exists to use the raw gdb output for synchronization instead of a temporary file. In the .sync configuration file use

[GENERAL]
use_tmp_logging_file=false

if you wish to use the Qt debugging frontend for the target.

Embedded devices and missing /proc/<pid>/maps

In some scenarios, such as debugging embedded devices over serial or raw firmware in QEMU, gdb is not aware of the PID and cannot access /proc/<pid>/maps.

In these cases, The [INIT] section is used to pass a custom context to the plugin. It allows overriding some fields such as the PID and memory mappings.

.sync content extract:

    [INIT]
    context = {
          "pid": 200,
          "mappings": [ [0x400000, 0x7A81158, 0x7681158, "asav941-200.qcow2|lina"] ]
      }

Each entry in the mappings is: mem_base, mem_end, mem_size, mem_name.

Installation

IDA extension

IDA prerequisites

IDA 7.x branch is required. For older versions (6.9x) please see archived release ida6.9x.

Install the IDA extension

For IDA installation, copy Syncplugin.py and retsync folder from ext_ida to IDA plugins directory, for example:

  • C:\Program Files\IDA Pro 7.4\plugins
  • %APPDATA%\Hex-Rays\IDA Pro\plugins
  • ~/.idapro/plugins

Run the IDA extension

  1. Open IDB
  2. Run the plugin in IDA (Alt-Shift-S) or Edit -> Plugins -> ret-sync
[sync] default idb name: ld.exe
[sync] sync enabled
[sync] cmdline: "C:\Program Files\Python38\python.exe" -u "C:\Users\user\AppData\Roaming\Hex-Rays\IDA Pro\plugins\retsync\broker.py" --idb "target.exe"
[sync] module base 0x100400000
[sync] hexrays #7.3.0.190614 found
[sync] broker started
[sync] plugin loaded
[sync] << broker << dispatcher not found, trying to run it
[sync] << broker << dispatcher now runs with pid: 6544
[sync] << broker << connected to dispatcher
[sync] << broker << listening on port 63107

IDA plugin troubleshooting

To troubleshoot issues with the IDA extension two options are available in the file retsync/rsconfig.py:

LOG_LEVEL = logging.INFO
LOG_TO_FILE_ENABLE = False

Setting LOG_LEVEL value to logging.DEBUG makes the plugin more verbose.

Setting LOG_TO_FILE_ENABLE value to True triggers the logging of exception information from broker.py and dispatcher.py into dedicated files. Log file are generated in the %TMP% folder with a name pattern retsync.%s.err .

Ghidra extension

Build the Ghidra extension

Either use the pre-built version from the ext_ghidra/dist folder or follow the instruction to build it. Each extension build only supports the version of Ghidra specified in the plugin's file name. E.g. ghidra_9.1_PUBLIC_20191104_retsync.zip is for Ghidra 9.1 Public.

  1. Install Ghidra
  2. Install gradle
apt install gradle
  1. Build extension for your Ghidra installation (replace $GHIDRA_DIR with your installation directory)
cd ext_ghidra
gradle -PGHIDRA_INSTALL_DIR=$GHIDRA_DIR

Install the Ghidra extension

  1. From Ghidra projects manager: File -> Install Extensions..., click on the + sign and select the ext_ghidra/dist/ghidra_*_retsync.zip and click OK. This will effectively extract the retsync folder from the zip into $GHIDRA_DIR/Extensions/Ghidra/
  2. Restart Ghidra as requested
  3. After reloading Ghidra, open a module in CodeBrowser. It should tell you a new extension plugin has been detected. Select "yes" to configure it. Then tick "RetSyncPlugin" and click OK. The console should show something like:
[*] retsync init
[>] programOpened: tm.sys
    imageBase: 0x1c0000000
  1. From Ghidra CodeBrowser tool: use toolbar icons or shortcuts to enable (Alt+s)/disable (Alt+Shift+s)/restart (Alt+r) synchronization.

A status window is also available from Windows -> RetSyncPlugin. You generally want to drop it on the side to integrate it with the Ghidra environment windows.

Binary Ninja extension

Binary Ninja support is experimental, make sure to backup your analysis databases.

Binary Ninja prerequisites

ret-sync requires Binary Ninja version 2.2 at minimum as well as Python 3 (Python 2 is not supported).

Install the Binary Ninja extension

ret-sync is not yet distributed through the Binary Ninja's Plugin Manager; a manual installation is required. Simply copy that content of the ext_bn folder into Binary Ninja's plugins folder, for example:

%APPDATA%\Binary Ninja\plugins

After restarting Binary Ninja, the following output should be present in the console window:

[sync] commands added
Loaded python3 plugin 'retsync'

WinDbg extension

Build the WinDbg extension

Either use pre-built binaries or use the Visual Studio 2017 solution provided in ext_windbg, (see https://docs.microsoft.com/en-us/visualstudio/releasenotes/vs2017-relnotes if needed).

This will build the x64\release\sync.dll file.

Install the WinDbg extension

You will need to copy the resulting sync.dll file into the appropriate Windbg extension path.

  • WinDbg Classic:

For earlier versions of Windbg this is is something like this (be careful of x86/x64 flavours), for example

C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\winext\sync.dll

  • Windbg Preview

The folder for storing extension seems to be based on the PATH, so you need to put it one of the queried locations.

One example is to put it here:

C:\Users\user\AppData\Local\Microsoft\WindowsApps\sync.dll

Run the WinDbg extension

  1. Launch WinDbg on target
  2. Load extension (.load command)
    0:000> .load sync
    [sync.dll] DebugExtensionInitialize, ExtensionApis loaded
  1. Sync WinDbg
      0:000> !sync
      [sync] No argument found, using default host (127.0.0.1:9100)
      [sync] sync success, sock 0x5a8
      [sync] probing sync
      [sync] sync is now enabled with host 127.0.0.1

E.g. in IDA's Output window

      [*] << broker << dispatcher msg: add new client (listening on port 63898), nb client(s): 1
      [*] << broker << dispatcher msg: new debugger client: dbg connect - HostMachine\HostUser
      [sync] set debugger dialect to windbg, enabling hotkeys

If Windbg's current module matches IDA file name

      [sync] idb is enabled with the idb client matching the module name.

WinDbg installation troubleshooting

Note: If you get the following error, it is because you haven't copied the file to the right folder in the above steps.

0: kd> .load sync
The call to LoadLibrary(sync) failed, Win32 error 0n2
    "The system cannot find the file specified."
Please check your debugger configuration and/or network access.

The error below usually means that Windbg tried to load the incorrect flavour of the extension, ex: x86 in place of the x64 sync.dll.

0:000> .load sync
The call to LoadLibrary(sync) failed, Win32 error 0n193
    "%1 is not a valid Win32 application."
Please check your debugger configuration and/or network access.

GNU gdb (GDB) installation

  1. Copy the ext_gdb/sync.py to the directory of your choice
  2. Load the extension (see auto-load-scripts)
    gdb> source sync.py
    [sync] configuration file loaded 192.168.52.1:9100
    [sync] commands added

LLDB installation

LLDB support is experimental, however:

  1. Load extension (can also be added in ~/.lldbinit)
    lldb> command script import sync

OllyDbg 1.10 installation

OllyDbg 1.10 support is experimental, however:

  1. Build the plugin using the VS solution (optional, see pre-built binaries)
  2. Copy the dll within OllyDbg's plugin directory

OllyDbg2 installation

OllyDbg2 support is experimental, however:

  1. Build the plugin using the VS solution (optional, see pre-built binaries)
  2. Copy the dll within OllyDbg2's plugin directory

x64dbg installation

Based on testplugin, https://github.com/x64dbg/testplugin. x64dbg support is experimental, however:

  1. Build the plugin using the VS solution (optional, see pre-built binaries). May you need a different version of the plugin sdk, a copy can be found in each release of x64dbg. Paste the "pluginsdk" directory into "ext_x64dbg\x64dbg_sync"
  2. Copy the dll (extension is .d32 or .dp64) within x64dbg's plugin directory.

Usage

ret-sync debugger commands

For command-line oriented debuggers (mainly Windbg and GDB) a set of commands is exposed by ret-sync to assist in the reverse-engineering task.

The commands below are generic (Windbg and GDB), please note that a ! prefix is needed on WinDbg (e.g.: sync in GDB, !sync in Windbg).

Debugger command Description
synchelp Display the list of available commands with short explanation
sync Start synchronization
syncoff Stop synchronization
cmt [-a address] <string> Add a comment at current ip in disassembler
rcmt [-a address] Reset comment at current ip in disassembler
fcmt [-a address] <string> Add a function comment for function in which current ip is located
raddr <expression> Add a comment with rebased address evaluated from expression
rln <expression> Get symbol from the disassembler for the given address
lbl [-a address] <string> Add a label name at current ip in disassembler
cmd <string> Execute a command in debugger and add its output as comment at current ip in disassembler
bc <||on|off|set 0xBBGGRR> Enable/disable path coloring in disassembler
idblist Get list of all IDB clients connected to the dispatcher
syncmodauto <on|off> Enable/disable disassembler auto switch based on module name
idbn <n> Set active IDB to the nth client
jmpto <expression>
jmpraw <expression> If an IDB is enabled then disassembler's view is synced with the resulting address.
translate <base> <addr> <mod> rebase an address with respect to its module's name and offset

WinDbg specific commands:

Debugger command Description
curmod Display module infomation for current instruction offset (for troubleshooting)
modlist Debugger Markup Language (DML) enhanced module list meant for smoother active idb switching
idb <module name> Set given module as the active idb (see modlist enhanced version of lm)
modmap <base> <size> <name> A synthetic ("faked") module (defined using its base address and size) is added to the debugger internal list
modunmap <base> Remove a previously mapped synthetic module at base address
modcheck <||md5> Use to check if current module really matches IDB's file (ex: module has been updated)
bpcmds <||save|load|> bpcmds wrapper, save and reload .bpcmds (breakpoints commands list) output to current IDB
ks Debugger Markup Language (DML) enhanced output of kv command

GDB specific commands:

Debugger command Description
bbt Beautiful backtrace. Similar to bt in GDB but requests symbols from disassembler
patch Patch bytes in disassembler based on live context
bx Similar to GDB x but using a symbol. The symbol will be resolved by disassembler
cc Continue to cursor in disassembler

IDA usage

IDA plugin's GUI

The Overwrite idb name input field is meant to change the default IDB name. It is the name that is used by the plugin to register with the dispatcher. IDB automatic switch is based on module name matching. In case of conflicting names (like a foo.exe and foo.dll), this can be used to ease matching. Please note, if you modify the input field while the sync is active, you have to re-register with the dispatcher; this can be done simply by using the "Restart" button.

As a reminder it is possible to alias by default using the .sync configuration file.

IDA global shortcuts

ret-sync defines these global shortcuts in IDA:

  • Alt-Shift-S - Run ret-sync plugin
  • Ctrl-Shift-S - Toggle global syncing
  • Ctrl-H - Toggle Hex-Rays syncing

Two buttons are also available in the Debug toolbar to toggle global and Hex-Rays syncing.

IDA bindings over debugger commands

Syncplugin.py also registers debugger command wrapper hotkeys.

  • F2 - Set breakpoint at cursor address
  • F3 - Set one-shot breakpoint at cursor address
  • Ctrl-F2 - Set hardware breakpoint at cursor address
  • Ctrl-F3 - Set one-shot hardware breakpoint at cursor address
  • Alt-F2 - Translate (rebase in debugger) current cursor address
  • Alt-F5 - Go
  • Ctrl-Alt-F5 - Run (GDB only)
  • F10 - Single step
  • F11 - Single trace

These commands are only available when the current IDB is active. When possible they have also been implemented for others debuggers.

Ghidra usage

Ghidra plugin's GUI

Once the RetSyncPlugin opened, you can add it to the CodeBrowser window by simple drag'n'drop:

If you want to view several modules, files need to be open in the same CodeBrowser viewer, simply drag'n'drop the additional ones in the CodeBrowser window to obtain the result as above.

Ghidra global shortcuts

ret-sync defines these global shortcuts in Ghidra:

  • Alt-S - Enable syncing
  • Alt-Shift-S - Disable syncing
  • Alt-R - Restart syncing
  • Alt-Shift-R - Reload configuration

Ghidra bindings over debugger commands

Bindings over debugger commands are also implemented. They are similar to the ones from IDA's extension (except the "Go" command).

  • F2 - Set breakpoint at cursor address
  • Ctrl-F2 - Set hardware breakpoint at cursor address
  • Alt-F3 - Set one-shot breakpoint at cursor address
  • Ctrl-F3 - Set one-shot hardware breakpoint at cursor address
  • Alt-F2 - Translate (rebase in debugger) current cursor address
  • F5 - Go
  • Alt-F5 - Run (GDB only)
  • F10 - Single step
  • F11 - Single trace

Binary Ninja usage

Binary Ninja global shortcuts

ret-sync defines these global shortcuts in Binary Ninja:

  • Alt-S - Enable syncing
  • Alt-Shift-S - Disable syncing

Binary Ninja shortcuts

Bindings over debugger commands are also implemented. They are similar to the ones from IDA's extension.

  • F2 - Set breakpoint at cursor address
  • Ctrl-F2 - Set hardware breakpoint at cursor address
  • Alt-F3 - Set one-shot breakpoint at cursor address
  • Ctrl-F3 - Set one-shot hardware breakpoint at cursor address
  • Alt-F2 - Translate (rebase in debugger) current cursor address
  • Alt-F5 - Go
  • F10 - Single step
  • F11 - Single trace

WinDbg usage

WinDbg plugin commands

  • !sync: Start synchronization
  • !syncoff: Stop synchronization
  • !synchelp: Display the list of available commands with short explanation.
  • !cmt [-a address] : Add comment at current ip in IDA
    [WinDbg]
    0:000:x86> pr
    eax=00000032 ebx=00000032 ecx=00000032 edx=0028eebc esi=00000032 edi=00000064
    eip=00430db1 esp=0028ed94 ebp=00000000 iopl=0         nv up ei pl nz na po nc
    cs=0023  ss=002b  ds=002b  es=002b  fs=0053  gs=002b             efl=00000202
    image00000000_00400000+0x30db1:
    00430db1 57    push    edi

    0:000:x86> dd esp 8
    0028ed94  00000000 00433845 0028eebc 00000032
    0028eda4  0028f88c 00000064 002b049e 00000110

    0:000:x86> !cmt 0028ed94  00000000 00433845 0028eebc 00000032
    [sync.dll]  !cmt called

    [IDA]
    .text:00430DB1    push    edi             ; 0028ed94  00000000 00433845 0028eebc 00000032
  • !rcmt [-a address]: Reset comment at current ip in IDA
    [WinDbg]
    0:000:x86> !rcmt
    [sync] !rcmt called

    [IDA]
    .text:00430DB1    push    edi
  • !fcmt [-a address] : Add a function comment for function in which current ip is located
    [WinDbg]
    0:000:x86> !fcmt decodes buffer with key
    [sync] !fcmt called

    [IDA]
    .text:004012E0 ; decodes buffer with key
    .text:004012E0                 public decrypt_func
    .text:004012E0 decrypt_func    proc near
    .text:004012E0                 push    ebp

Note: calling this command without argument reset the function's comment.

  • !raddr : Add a comment with rebased address evaluated from expression
  • !rln : Get symbol from the disassembler for the given address
  • !lbl [-a address] : Add a label name at current ip in disassembler
    [WinDbg]
    0:000:x86> !lbl meaningful_label
    [sync] !lbl called

    [IDA]
    .text:000000000040271E meaningful_label:
    .text:000000000040271E    mov     rdx, rsp
  • !cmd : Execute a command in WinDbg and add its output as comment at current ip in disassembler
    [WinDbg]
    0:000:x86> pr
    eax=00000032 ebx=00000032 ecx=00000032 edx=0028eebc esi=00000032 edi=00000064
    eip=00430db1 esp=0028ed94 ebp=00000000 iopl=0         nv up ei pl nz na po nc
    cs=0023  ss=002b  ds=002b  es=002b  fs=0053  gs=002b             efl=00000202
    image00000000_00400000+0x30db1:
    00430db1 57     push    edi
    [sync.dll]  !cmd r edi

    [IDA]
    .text:00430DB1    push    edi             ; edi=00000064
  • !bc <||on|off|set 0xBBGGRR> : Enable/disable path coloring in disassembler. This is NOT a code tracing tool, there are efficient tools for that. Each manually stepped instruction is colored in the graph. Color a single instruction at current ip if called without argument. "set" argument is used to set path color with a new hex rgb code (reset color if called with a value > 0xFFFFFF).
  • !idblist: Get list of all IDB clients connected to the dispatcher:
    [WinDbg]
    0:000> !idblist
    > currently connected idb(s):
        [0] target.exe
  • !syncmodauto <on|off>: Enable/disable disassembler auto switch based on module name:
    [WinDbg]
    0:000> !syncmodauto off

    [IDA]
    [*] << broker << dispatcher msg: sync mode auto set to off
  • !idbn : Set active IDB to the nth client. n should be a valid decimal value. This is a semi-automatic mode (personal tribute to the tremendous jj)
    [WinDbg]
    0:000:> !idbn 0
    > current idb set to 0

In this example, current active IDB client would have been set to:

	[0] target.exe.
  • !jmpto : Expression given as argument is evaluated in the context of the current debugger's status. disassembler's view is then synced with the resulting address if a matching module is registered. Can be seen as a manual syncing, relocation is automatically performed, on the fly. Especially useful for randomly relocated binary.
  • !jmpraw : Expression given as argument is evaluated in the context of the current debugger's status. If an IDB is enabled then disassembler's view is synced with the resulting address. Address is not rebased and there is no IDB switching. Especially useful for dynamically allocated/generated code.
  • !modmap : A synthetic ("faked") module (defined using its base address and size) is added to the debugger internal list. From msdn: "If all the modules are reloaded - for example, by calling Reload with the Module parameter set to an empty string - all synthetic modules will be discarded." It can be used to more easily debug dynamically allocated/generated code.
  • !modunmap : Remove a previously mapped synthetic module at base address.
  • !modcheck <||md5>: Use to check if current module really matches IDB's file (ex: module has been updated) When called without an argument, pdb's GUID from Debug Directory is used. It can alternatively use md5, but only with a local debuggee (not in remote kernel debugging).
  • !bpcmds <||save|load|>: bpcmds wrapper, save and reload .bpcmds (breakpoints commands list) output to current IDB. Display (but not execute) saved data if called with no argument. Persistent storage is achieved using IDA's netnode feature.
  • !ks: Debugger Markup Language (DML) enhanced output of kv command. Code Addresses are clickable (!jmpto) as well as data addresses (dc).
  • !translate : Meant to be used from IDA (Alt-F2 shortcut), rebase an address with respect to its module's name and offset.

Address optional argument

!cmt, !rcmt and !fcmt commands support an optional address option: -a or --address. Address should be passed as an hexadecimal value. Command parsing is based on python's argparse module. To stop line parsing use --.

    [WinDbg]
    0:000:x86> !cmt -a 0x430DB2 comment

The address has to be a valid instruction's address.

GNU gdb (GDB) usage

Sync with host:

    gdb> sync
    [sync] sync is now enabled with host 192.168.52.1
    <not running>

    gdb> r
    Starting program: /bin/ls
    [Thread debugging using libthread_db enabled]
    Using host libthread_db library "/lib/libthread_db.so.1".

GDB plugin commands

Use commands, without "!" prefix

    (gdb) cmd x/i $pc
    [sync] command output: => 0x8049ca3:    push   edi

    (gdb) synchelp
    [sync] extension commands help:
     > sync <host>
     > syncoff
     > cmt [-a address] <string>
     > rcmt [-a address] <string>
     > fcmt [-a address] <string>
     > cmd <string>
     > bc <on|off|>
     > rln <address>
     > bbt <symbol>
     > patch <addr> <count> <size>
     > bx /i <symbol>
     > cc
     > translate <base> <addr> <mod>
  • rln: Get symbol from the IDB for the given address
  • bbt: Beautiful backtrace. Similar to bt but requests symbols from disassembler
    (gdb) bt
    #0  0x0000000000a91a73 in ?? ()
    #1  0x0000000000a6d994 in ?? ()
    #2  0x0000000000a89125 in ?? ()
    #3  0x0000000000a8a574 in ?? ()
    #4  0x000000000044f83b in ?? ()
    #5  0x0000000000000000 in ?? ()
    (gdb) bbt
    #0 0x0000000000a91a73 in IKE_GetAssembledPkt ()
    #1 0x0000000000a6d994 in catcher ()
    #2 0x0000000000a89125 in IKEProcessMsg ()
    #3 0x0000000000a8a574 in IkeDaemon ()
    #4 0x000000000044f83b in sub_44F7D0 ()
    #5 0x0000000000000000 in  ()
  • patch: Patch bytes in disassembler based on live context
  • bx: Beautiful display. Similar to x but using a symbol. The symbol will be resolved by disassembler.
  • cc: Continue to cursor in disassembler. This is an alternative to using F3 to set a one-shot breakpoint and F5 to continue. This is useful if you prefer to do it from gdb.
    (gdb) b* 0xA91A73
    Breakpoint 1 at 0xa91a73
    (gdb) c
    Continuing.

    Breakpoint 1, 0x0000000000a91a73 in ?? ()
    (gdb) cc
    [sync] current cursor: 0xa91a7f
    [sync] reached successfully
    (gdb)

LLDB usage

  1. Sync with host
    lldb> process launch -s
    lldb> sync
    [sync] connecting to localhost
    [sync] sync is now enabled with host localhost
    [sync] event handler started
  1. Use commands
    lldb> synchelp
    [sync] extension commands help:
     > sync <host>                   = synchronize with <host> or the default value
     > syncoff                       = stop synchronization
     > cmt <string>                  = add comment at current eip in IDA
     > rcmt <string>                 = reset comments at current eip in IDA
     > fcmt <string>                 = add a function comment for 'f = get_func(eip)' in IDA
     > cmd <string>                  = execute command <string> and add its output as comment at current eip in IDA
     > bc <on|off|>                  = enable/disable path coloring in IDA
                                       color a single instruction at current eip if called without argument
    lldb> cmt mooo

OllyDbg 1.10 usage

  1. Use Plugins menu or shortcuts to enable (Alt+s)/disable (Alt+u) synchronization.

OllyDbg2 usage

  1. Use Plugins menu or shortcuts to enable (Ctrl+s)/disable (Ctrl+u) synchronization.

Due to the beta status of OllyDbg2 API, only the following features have been implemented:

  • Graph sync [use F7; F8 for stepping]
  • Comment [use CTRL+;]
  • Label [use CTRL+:]

x64dbg usage

  1. Use Plugins menu or commands enable ("!sync") or disable ("!syncoff") synchronization.

  2. Use commands

[sync] synchelp command!
[sync] extension commands help:
 > !sync                          = synchronize with <host from conf> or the default value
 > !syncoff                       = stop synchronization
 > !syncmodauto <on | off>        = enable / disable idb auto switch based on module name
 > !synchelp                      = display this help
 > !cmt <string>                  = add comment at current eip in IDA
 > !rcmt <string>                 = reset comments at current eip in IDA
 > !idblist                       = display list of all IDB clients connected to the dispatcher
 > !idb <module name>             = set given module as the active idb (see !idblist)
 > !idbn <n>                      = set active idb to the n_th client. n should be a valid decimal value
 > !translate <base> <addr> <mod> = rebase an address with respect to local module's base

Note: using the !translate command from a disassembler (IDA/Ghidra, Alt-F2 shortcut), will make the disassembler window to "jump" to the specific address (equivalent of running disasm in x64dbg command line).

Extend

While initially focused on dynamic analysis (debuggers), it is of-course possible to extend the plugins set and integrate with other tools.

Other resource(s):

TODO

  • Sure.

Known Bugs/Limitations

  • Tested with Python 2.7/3.7, IDA 7.5 (Windows, Linux and Mac OS X), Ghidra 9.2, Binary Ninja 2.2.2487, GNU gdb (GDB) 8.1.0 (Debian), lldb 310.2.37.
  • THERE IS NO AUTHENTICATION/ENCRYPTION whatsoever between the parties; you're on your own.
  • Self modifying code is out of scope.

With GDB:

  • it seems that stop event is not called when using 'return' command.
  • multi-threading debugging have issues with signals.

With WinDbg:

  • IDA's client plugin gets notified even though encountered breakpoint uses a command string that makes it continue ('g'). This can cause major slow-down if there are too much of these events. A limited fix has been implemented, the best solution is still to sync off temporarily.
  • Possible race condition

With Ghidra:

  • Shortcuts are not working as expected in decompiler widget.

With IDA:

  • Graph window redrawing is quite slow for big graphs.
  • ret-sync shortcuts conflicts in Linux environments.

Conflict(s):

  • Logitech Updater software is known to use the same default port (9100). A solution is to use a global .sync configuration file to define a different port.
[INTERFACE]
host=127.0.0.1
port=9234

License

ret-sync is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/.

The Binary Ninja plugin is released under the MIT licence.

Greetz

Hail to Bruce Dang, StalkR, @Ivanlef0u, Damien Aumaître, Sébastien Renaud and Kévin Szkudlapski, @m00dy, @saidelike, Xavier Mehrenberger, ben64, Raphaël Rigo, Jiss for their kindness, help, feedbacks and thoughts. Ilfak Guilfanov, Igor Skochinsky and Arnaud Diederen for their help with IDA's internals and outstanding support. Thank you to Jordan Wiens and Vector 35. Finally, thank you also to all the contributors and everyone who reported issues/bugs.

GNU GENERAL PUBLIC LICENSE Version 3, 29 June 2007 Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/> Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The GNU General Public License is a free, copyleft license for software and other kinds of works. The licenses for most software and other practical works are designed to take away your freedom to share and change the works. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program--to make sure it remains free software for all its users. We, the Free Software Foundation, use the GNU General Public License for most of our software; it applies also to any other work released this way by its authors. You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for them if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs, and that you know you can do these things. To protect your rights, we need to prevent others from denying you these rights or asking you to surrender the rights. Therefore, you have certain responsibilities if you distribute copies of the software, or if you modify it: responsibilities to respect the freedom of others. For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the same freedoms that you received. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. Developers that use the GNU GPL protect your rights with two steps: (1) assert copyright on the software, and (2) offer you this License giving you legal permission to copy, distribute and/or modify it. For the developers' and authors' protection, the GPL clearly explains that there is no warranty for this free software. For both users' and authors' sake, the GPL requires that modified versions be marked as changed, so that their problems will not be attributed erroneously to authors of previous versions. Some devices are designed to deny users access to install or run modified versions of the software inside them, although the manufacturer can do so. This is fundamentally incompatible with the aim of protecting users' freedom to change the software. The systematic pattern of such abuse occurs in the area of products for individuals to use, which is precisely where it is most unacceptable. Therefore, we have designed this version of the GPL to prohibit the practice for those products. If such problems arise substantially in other domains, we stand ready to extend this provision to those domains in future versions of the GPL, as needed to protect the freedom of users. Finally, every program is threatened constantly by software patents. States should not allow patents to restrict development and use of software on general-purpose computers, but in those that do, we wish to avoid the special danger that patents applied to a free program could make it effectively proprietary. To prevent this, the GPL assures that patents cannot be used to render the program non-free. The precise terms and conditions for copying, distribution and modification follow. TERMS AND CONDITIONS 0. Definitions. "This License" refers to version 3 of the GNU General Public License. "Copyright" also means copyright-like laws that apply to other kinds of works, such as semiconductor masks. "The Program" refers to any copyrightable work licensed under this License. Each licensee is addressed as "you". "Licensees" and "recipients" may be individuals or organizations. To "modify" a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission, other than the making of an exact copy. The resulting work is called a "modified version" of the earlier work or a work "based on" the earlier work. A "covered work" means either the unmodified Program or a work based on the Program. To "propagate" a work means to do anything with it that, without permission, would make you directly or secondarily liable for infringement under applicable copyright law, except executing it on a computer or modifying a private copy. Propagation includes copying, distribution (with or without modification), making available to the public, and in some countries other activities as well. To "convey" a work means any kind of propagation that enables other parties to make or receive copies. Mere interaction with a user through a computer network, with no transfer of a copy, is not conveying. An interactive user interface displays "Appropriate Legal Notices" to the extent that it includes a convenient and prominently visible feature that (1) displays an appropriate copyright notice, and (2) tells the user that there is no warranty for the work (except to the extent that warranties are provided), that licensees may convey the work under this License, and how to view a copy of this License. If the interface presents a list of user commands or options, such as a menu, a prominent item in the list meets this criterion. 1. Source Code. The "source code" for a work means the preferred form of the work for making modifications to it. "Object code" means any non-source form of a work. A "Standard Interface" means an interface that either is an official standard defined by a recognized standards body, or, in the case of interfaces specified for a particular programming language, one that is widely used among developers working in that language. The "System Libraries" of an executable work include anything, other than the work as a whole, that (a) is included in the normal form of packaging a Major Component, but which is not part of that Major Component, and (b) serves only to enable use of the work with that Major Component, or to implement a Standard Interface for which an implementation is available to the public in source code form. A "Major Component", in this context, means a major essential component (kernel, window system, and so on) of the specific operating system (if any) on which the executable work runs, or a compiler used to produce the work, or an object code interpreter used to run it. The "Corresponding Source" for a work in object code form means all the source code needed to generate, install, and (for an executable work) run the object code and to modify the work, including scripts to control those activities. However, it does not include the work's System Libraries, or general-purpose tools or generally available free programs which are used unmodified in performing those activities but which are not part of the work. For example, Corresponding Source includes interface definition files associated with source files for the work, and the source code for shared libraries and dynamically linked subprograms that the work is specifically designed to require, such as by intimate data communication or control flow between those subprograms and other parts of the work. The Corresponding Source need not include anything that users can regenerate automatically from other parts of the Corresponding Source. The Corresponding Source for a work in source code form is that same work. 2. Basic Permissions. All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program. The output from running a covered work is covered by this License only if the output, given its content, constitutes a covered work. This License acknowledges your rights of fair use or other equivalent, as provided by copyright law. You may make, run and propagate covered works that you do not convey, without conditions so long as your license otherwise remains in force. You may convey covered works to others for the sole purpose of having them make modifications exclusively for you, or provide you with facilities for running those works, provided that you comply with the terms of this License in conveying all material for which you do not control copyright. Those thus making or running the covered works for you must do so exclusively on your behalf, under your direction and control, on terms that prohibit them from making any copies of your copyrighted material outside their relationship with you. Conveying under any other circumstances is permitted solely under the conditions stated below. Sublicensing is not allowed; section 10 makes it unnecessary. 3. Protecting Users' Legal Rights From Anti-Circumvention Law. No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting circumvention of such measures. When you convey a covered work, you waive any legal power to forbid circumvention of technological measures to the extent such circumvention is effected by exercising rights under this License with respect to the covered work, and you disclaim any intention to limit operation or modification of the work as a means of enforcing, against the work's users, your or third parties' legal rights to forbid circumvention of technological measures. 4. Conveying Verbatim Copies. You may convey verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice; keep intact all notices stating that this License and any non-permissive terms added in accord with section 7 apply to the code; keep intact all notices of the absence of any warranty; and give all recipients a copy of this License along with the Program. You may charge any price or no price for each copy that you convey, and you may offer support or warranty protection for a fee. 5. Conveying Modified Source Versions. You may convey a work based on the Program, or the modifications to produce it from the Program, in the form of source code under the terms of section 4, provided that you also meet all of these conditions: a) The work must carry prominent notices stating that you modified it, and giving a relevant date. b) The work must carry prominent notices stating that it is released under this License and any conditions added under section 7. This requirement modifies the requirement in section 4 to "keep intact all notices". c) You must license the entire work, as a whole, under this License to anyone who comes into possession of a copy. This License will therefore apply, along with any applicable section 7 additional terms, to the whole of the work, and all its parts, regardless of how they are packaged. This License gives no permission to license the work in any other way, but it does not invalidate such permission if you have separately received it. d) If the work has interactive user interfaces, each must display Appropriate Legal Notices; however, if the Program has interactive interfaces that do not display Appropriate Legal Notices, your work need not make them do so. A compilation of a covered work with other separate and independent works, which are not by their nature extensions of the covered work, and which are not combined with it such as to form a larger program, in or on a volume of a storage or distribution medium, is called an "aggregate" if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilation's users beyond what the individual works permit. Inclusion of a covered work in an aggregate does not cause this License to apply to the other parts of the aggregate. 6. Conveying Non-Source Forms. You may convey a covered work in object code form under the terms of sections 4 and 5, provided that you also convey the machine-readable Corresponding Source under the terms of this License, in one of these ways: a) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software interchange. b) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by a written offer, valid for at least three years and valid for as long as you offer spare parts or customer support for that product model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the software in the product that is covered by this License, on a durable physical medium customarily used for software interchange, for a price no more than your reasonable cost of physically performing this conveying of source, or (2) access to copy the Corresponding Source from a network server at no charge. c) Convey individual copies of the object code with a copy of the written offer to provide the Corresponding Source. This alternative is allowed only occasionally and noncommercially, and only if you received the object code with such an offer, in accord with subsection 6b. d) Convey the object code by offering access from a designated place (gratis or for a charge), and offer equivalent access to the Corresponding Source in the same way through the same place at no further charge. You need not require recipients to copy the Corresponding Source along with the object code. If the place to copy the object code is a network server, the Corresponding Source may be on a different server (operated by you or a third party) that supports equivalent copying facilities, provided you maintain clear directions next to the object code saying where to find the Corresponding Source. Regardless of what server hosts the Corresponding Source, you remain obligated to ensure that it is available for as long as needed to satisfy these requirements. e) Convey the object code using peer-to-peer transmission, provided you inform other peers where the object code and Corresponding Source of the work are being offered to the general public at no charge under subsection 6d. A separable portion of the object code, whose source code is excluded from the Corresponding Source as a System Library, need not be included in conveying the object code work. A "User Product" is either (1) a "consumer product", which means any tangible personal property which is normally used for personal, family, or household purposes, or (2) anything designed or sold for incorporation into a dwelling. In determining whether a product is a consumer product, doubtful cases shall be resolved in favor of coverage. For a particular product received by a particular user, "normally used" refers to a typical or common use of that class of product, regardless of the status of the particular user or of the way in which the particular user actually uses, or expects or is expected to use, the product. A product is a consumer product regardless of whether the product has substantial commercial, industrial or non-consumer uses, unless such uses represent the only significant mode of use of the product. "Installation Information" for a User Product means any methods, procedures, authorization keys, or other information required to install and execute modified versions of a covered work in that User Product from a modified version of its Corresponding Source. The information must suffice to ensure that the continued functioning of the modified object code is in no case prevented or interfered with solely because modification has been made. If you convey an object code work under this section in, or with, or specifically for use in, a User Product, and the conveying occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in perpetuity or for a fixed term (regardless of how the transaction is characterized), the Corresponding Source conveyed under this section must be accompanied by the Installation Information. But this requirement does not apply if neither you nor any third party retains the ability to install modified object code on the User Product (for example, the work has been installed in ROM). The requirement to provide Installation Information does not include a requirement to continue to provide support service, warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in which it has been modified or installed. Access to a network may be denied when the modification itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across the network. Corresponding Source conveyed, and Installation Information provided, in accord with this section must be in a format that is publicly documented (and with an implementation available to the public in source code form), and must require no special password or key for unpacking, reading or copying. 7. Additional Terms. "Additional permissions" are terms that supplement the terms of this License by making exceptions from one or more of its conditions. Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License, to the extent that they are valid under applicable law. If additional permissions apply only to part of the Program, that part may be used separately under those permissions, but the entire Program remains governed by this License without regard to the additional permissions. When you convey a copy of a covered work, you may at your option remove any additional permissions from that copy, or from any part of it. (Additional permissions may be written to require their own removal in certain cases when you modify the work.) You may place additional permissions on material, added by you to a covered work, for which you have or can give appropriate copyright permission. Notwithstanding any other provision of this License, for material you add to a covered work, you may (if authorized by the copyright holders of that material) supplement the terms of this License with terms: a) Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or b) Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it; or c) Prohibiting misrepresentation of the origin of that material, or requiring that modified versions of such material be marked in reasonable ways as different from the original version; or d) Limiting the use for publicity purposes of names of licensors or authors of the material; or e) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or f) Requiring indemnification of licensors and authors of that material by anyone who conveys the material (or modified versions of it) with contractual assumptions of liability to the recipient, for any liability that these contractual assumptions directly impose on those licensors and authors. All other non-permissive additional terms are considered "further restrictions" within the meaning of section 10. If the Program as you received it, or any part of it, contains a notice stating that it is governed by this License along with a term that is a further restriction, you may remove that term. If a license document contains a further restriction but permits relicensing or conveying under this License, you may add to a covered work material governed by the terms of that license document, provided that the further restriction does not survive such relicensing or conveying. If you add terms to a covered work in accord with this section, you must place, in the relevant source files, a statement of the additional terms that apply to those files, or a notice indicating where to find the applicable terms. Additional terms, permissive or non-permissive, may be stated in the form of a separately written license, or stated as exceptions; the above requirements apply either way. 8. Termination. You may not propagate or modify a covered work except as expressly provided under this License. Any attempt otherwise to propagate or modify it is void, and will automatically terminate your rights under this License (including any patent licenses granted under the third paragraph of section 11). However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) provisionally, unless and until the copyright holder explicitly and finally terminates your license, and (b) permanently, if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation. Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the violation by some reasonable means, this is the first time you have received notice of violation of this License (for any work) from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice. Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this License. If your rights have been terminated and not permanently reinstated, you do not qualify to receive new licenses for the same material under section 10. 9. Acceptance Not Required for Having Copies. You are not required to accept this License in order to receive or run a copy of the Program. Ancillary propagation of a covered work occurring solely as a consequence of using peer-to-peer transmission to receive a copy likewise does not require acceptance. However, nothing other than this License grants you permission to propagate or modify any covered work. These actions infringe copyright if you do not accept this License. Therefore, by modifying or propagating a covered work, you indicate your acceptance of this License to do so. 10. Automatic Licensing of Downstream Recipients. Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run, modify and propagate that work, subject to this License. You are not responsible for enforcing compliance by third parties with this License. An "entity transaction" is a transaction transferring control of an organization, or substantially all assets of one, or subdividing an organization, or merging organizations. If propagation of a covered work results from an entity transaction, each party to that transaction who receives a copy of the work also receives whatever licenses to the work the party's predecessor in interest had or could give under the previous paragraph, plus a right to possession of the Corresponding Source of the work from the predecessor in interest, if the predecessor has it or can get it with reasonable efforts. You may not impose any further restrictions on the exercise of the rights granted or affirmed under this License. For example, you may not impose a license fee, royalty, or other charge for exercise of rights granted under this License, and you may not initiate litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making, using, selling, offering for sale, or importing the Program or any portion of it. 11. Patents. A "contributor" is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based. The work thus licensed is called the contributor's "contributor version". A contributor's "essential patent claims" are all patent claims owned or controlled by the contributor, whether already acquired or hereafter acquired, that would be infringed by some manner, permitted by this License, of making, using, or selling its contributor version, but do not include claims that would be infringed only as a consequence of further modification of the contributor version. For purposes of this definition, "control" includes the right to grant patent sublicenses in a manner consistent with the requirements of this License. Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the contributor's essential patent claims, to make, use, sell, offer for sale, import and otherwise run, modify and propagate the contents of its contributor version. In the following three paragraphs, a "patent license" is any express agreement or commitment, however denominated, not to enforce a patent (such as an express permission to practice a patent or covenant not to sue for patent infringement). To "grant" such a patent license to a party means to make such an agreement or commitment not to enforce a patent against the party. If you convey a covered work, knowingly relying on a patent license, and the Corresponding Source of the work is not available for anyone to copy, free of charge and under the terms of this License, through a publicly available network server or other readily accessible means, then you must either (1) cause the Corresponding Source to be so available, or (2) arrange to deprive yourself of the benefit of the patent license for this particular work, or (3) arrange, in a manner consistent with the requirements of this License, to extend the patent license to downstream recipients. "Knowingly relying" means you have actual knowledge that, but for the patent license, your conveying the covered work in a country, or your recipient's use of the covered work in a country, would infringe one or more identifiable patents in that country that you have reason to believe are valid. If, pursuant to or in connection with a single transaction or arrangement, you convey, or propagate by procuring conveyance of, a covered work, and grant a patent license to some of the parties receiving the covered work authorizing them to use, propagate, modify or convey a specific copy of the covered work, then the patent license you grant is automatically extended to all recipients of the covered work and works based on it. A patent license is "discriminatory" if it does not include within the scope of its coverage, prohibits the exercise of, or is conditioned on the non-exercise of one or more of the rights that are specifically granted under this License. You may not convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing software, under which you make payment to the third party based on the extent of your activity of conveying the work, and under which the third party grants, to any of the parties who would receive the covered work from you, a discriminatory patent license (a) in connection with copies of the covered work conveyed by you (or copies made from those copies), or (b) primarily for and in connection with specific products or compilations that contain the covered work, unless you entered into that arrangement, or that patent license was granted, prior to 28 March 2007. Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that may otherwise be available to you under applicable patent law. 12. No Surrender of Others' Freedom. If conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot convey a covered work so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not convey it at all. For example, if you agree to terms that obligate you to collect a royalty for further conveying from those to whom you convey the Program, the only way you could satisfy both those terms and this License would be to refrain entirely from conveying the Program. 13. Use with the GNU Affero General Public License. Notwithstanding any other provision of this License, you have permission to link or combine any covered work with a work licensed under version 3 of the GNU Affero General Public License into a single combined work, and to convey the resulting work. The terms of this License will continue to apply to the part which is the covered work, but the special requirements of the GNU Affero General Public License, section 13, concerning interaction through a network will apply to the combination as such. 14. Revised Versions of this License. The Free Software Foundation may publish revised and/or new versions of the GNU General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies that a certain numbered version of the GNU General Public License "or any later version" applies to it, you have the option of following the terms and conditions either of that numbered version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of the GNU General Public License, you may choose any version ever published by the Free Software Foundation. If the Program specifies that a proxy can decide which future versions of the GNU General Public License can be used, that proxy's public statement of acceptance of a version permanently authorizes you to choose that version for the Program. Later license versions may give you additional or different permissions. However, no additional obligations are imposed on any author or copyright holder as a result of your choosing to follow a later version. 15. Disclaimer of Warranty. THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. Limitation of Liability. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 17. Interpretation of Sections 15 and 16. If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their terms, reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively state the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. <one line to give the program's name and a brief idea of what it does.> Copyright (C) <year> <name of author> This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. Also add information on how to contact you by electronic and paper mail. If the program does terminal interaction, make it output a short notice like this when it starts in an interactive mode: <program> Copyright (C) <year> <name of author> This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details. The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, your program's commands might be different; for a GUI interface, you would use an "about box". You should also get your employer (if you work as a programmer) or school, if any, to sign a "copyright disclaimer" for the program, if necessary. For more information on this, and how to apply and follow the GNU GPL, see <http://www.gnu.org/licenses/>. The GNU General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this License. But first, please read <http://www.gnu.org/philosophy/why-not-lgpl.html>.

简介

暂无描述 展开 收起
GPL-3.0
取消

发行版

暂无发行版

贡献者

全部

近期动态

加载更多
不能加载更多了
1
https://gitee.com/hzfcode/ret-sync.git
git@gitee.com:hzfcode/ret-sync.git
hzfcode
ret-sync
ret-sync
master

搜索帮助